• IBM webMethods Module for EDI
•  About this help
  • Document Conventions
•  Understanding EDI Concepts
  •  Overview of IBM webMethods Module for EDI
    • Overview
    • Architecture
    • Supported EDI Standards
  •  Processing Inbound EDI Documents
    •  Overview
      •  Before You Process EDI Documents
        • Flat File Schemas
    •  Processing Inbound EDI Documents with Trading Networks
      • Creating an EDI Client
      •  Defining Trading Partner Information
        • Using Standard or Non-Standard Processing
        • Comparing Standard vs Non-Standard Processing
      • EDI Document Inbound Processing
    • Initial Processing of the EDI Recognizer
    • Processing Documents in Trading Networks
    •  Processing Rules for Inbound EDI Documents
      • Preprocessing Actions
      • Processing Actions
    • Creating EDI Trading Partner Agreements
    • Generating Functional Acknowledgments
    • Generating Interchange Acknowledgments
  •  Forming EDI Documents and Sending Them Outbound
    • Overview
    • Creating a Service for Forming an Outbound EDI Document
    • Delivering the EDI Document Directly from the Service that Forms It
    • Submitting the Outbound EDI Document to Trading Networks to Deliver It
    • Routing the Outbound EDI Document to Trading Networks to Deliver It
    • Generating the AUTACK Message for EANCOM
  •  Working with VANs
    • Overview
    • Inbound Processing: Retrieving Documents from VANs
    • Outbound Processing: Delivering Documents to VANs
  •  Batching Outbound EDI Documents
    • Overview
    • Creating the Batched EDI Documents
    • Delivering the Batched Document
  •  EDI Documents in Business Processes
    • Overview
    • How You Define the Business Process
    • Conversation IDs for EDI Documents
    • How EDI Documents are Passed to a Business Process
  •  Using Module for EDI Decoupled from Trading Networks
    •  Overview
      • Configuring Module for EDI Decoupled from Trading Networks
    •  Processing of Inbound EDI Documents
      • Services to Process the Inbound EDI Document
    • Forming EDI Documents to Send Outbound
•  Installing and Using EDI Module
  •  Installing, Upgrading, and Uninstalling IBM webMethods Module for EDI
    • Overview
    • Requirements
    • Installing Module for EDI
    • Upgrading the Module for EDI from 9.0 to 9.12
    •  Uninstalling Module for EDI
      • Before You Begin
      • Uninstalling Module 9.12 for EDI
  •  Configuring IBM webMethods Module for EDI
    • Overview
    • Assigning User-Specific Permissions in My webMethods
    • Defining Module for EDI Properties
    •  Setting Up Items Required for Structural Validation and Conversion
      • Configuring Format Services to Convert Field Values
      • Associating the EDI Format Services with EDI Data Types
      • Creating Flat File Schemas for Internal-Format Documents
    •  Defining TN EDI Document Types
      •  Step 1: Define Document Type Information
        • Defining Document Type Information Using My webMethods
      •  Step 2: Define Attributes to be Extracted from Documents
        • Attributes Stored for TRADACOMS Document Types
        •  Extracting a Document Attribute Using an XQL Query
          • Examples of Extracting a Document Attribute Using an XQL Query
      • Step 3: Define Processing Options
    • Creating a TN EDI Document Type Based on a Transaction
    •  Flat File Schema Namespace Conventions
      • Flat File Schema Namespace Conventions for Non-TRADACOMS Standards
      • Flat File Schema Namespace Conventions When Using TRADACOMS
    •  Managing TN EDI Document Types
      • Viewing the Code List Details
      • Viewing Alternate Name and Description of Segments
      • Updating TN EDI Document Types
      • Updating the Description or Status of a TN EDI Document Type
      • Updating the Processing Options Specified in the Document Type
      • Updating a TN EDI Document Type Based on a Transaction
    •  Managing Document Attributes
      • Adding a Document Attribute
      • Editing a Document Attribute
      • Deleting a Document Attribute
    •  Overwriting Document Attributes Extracted from Inbound Documents
      • EDI Transaction
      • TA1 Transaction
      • FA Transaction
    • Adding New Versions of EDI Standards
  •  Defining Trading Partner Information
    • Overview
    • Partner Information You Need to Define
    • Defining Trading Partner Profiles
    • Adding External ID Types for EDI ID Qualifiers
    • Adding and Overriding EDI ID Qualifiers
    • Partner Profile ID Types Mapping for EDI Documents
    •  Defining EDI Trading Partner Agreements
      • Modifying the Default EDITPA
      • Defining a Partner-Specific EDITPA
      •  wm.b2b.editn.TPA:EDITPA IS Document Type
        • GSRouting Variables
        • PersistMultipleDocEnvelope Variable
        • processingMode Variable
        • splitOption Variable
        • FAReconciliation Variable
        • UNAmode Variable
        • publishBatchFailEvent Variable
        • delimiters Variables
        • envelopeIdentifier Variables
        • ICheaderInfo Variables
        • FAGeneration Variables
        • ControlNumberManagement Variables
        • useReverseRoute Variable
        • BatchCriteria Variables
        • EDITransportMedia Variable
        • persistOriginalEnvelope Variable
        • documentPersistOrder Variable
        • LateFA Variables
        • X12TA1Generation Variables
        • EANCOMAUTACK Variables
  •  Defining Trading Partner Information When Using TRADACOMS
    •  Overview
      • Partner Information You Need to Define When Using TRADACOMS
    •  Defining Trading Partner Profiles When Using TRADACOMS
      •  External ID Types When Using TRADACOMS
        • Optionally Configuring the External ID Types When Using TRADACOMS
    •  Defining EDI Trading Partner Agreements When Using TRADACOMS
      • Modifying the Default EDITPA When Using TRADACOMS
      • Defining a Partner-Specific EDITPA When Using TRADACOMS
      •  wm.b2b.editn.TPA:EDITPA IS Document Type When Using TRADACOMS
        • TRADACOM Variables
      • Storage Options for File Document Types
      •  Errors that Prevent the Splitting of Transmissions
        • Validation Errors
        • Invalid File Structure
  •  Defining Control Number Information for Trading Partners
    • Overview
    •  Managing Control Number Information
      • Defining How Module for EDI Creates the Control Number Sequence
      • Adding Entries to the EDIControlNumber Table
      •  Configuring Control Number Settings
        • Configuring Control Number Settings Using the My webMethods Control Numbers Page
        • Configuring Control Number Settings Using the My webMethods Partner Profiles Page
      • Updating Control Number Settings
    •  Turning Inbound Control Number Validation On and Off
      • Activating Validation for ANSI X12 or UN/EDIFACT Documents
      • Activating Validation for VDA Documents
      • Activating Validation for TRADACOMS Documents
    •  Defining Control Number Information for Processing Documents
      • Defining Control Number Information for Processing Inbound Documents
      • Defining Control Number Information for Processing Outbound Documents
    •  Defining Actions Module for EDI Can Take for Invalid Control Numbers
      • Defining How to Handle Invalid Control Numbers for ANSI X12 or UN/EDIFACT Documents
      • Defining How to Handle Invalid Control Numbers for VDA Documents
      • Defining How to Handle Invalid Control Numbers for TRADACOMS Documents
    •  Searching for Existing Control Number Settings
      • Searching for Existing Control Number Settings Using My webMethods
  •  Creating Clients that Send EDI Documents to Integration Server
    • Overview
    • Defining the Content Type to Use
    • Before Creating the Service to Form an EDI Document
    •  Creating the Service the Client Invokes to Handle EDI Documents
      • Logic to Include in the Service to Form an EDI Document
      • Validating the Input Internal-Format Document When It Is an IData Object
      •  Adding UN/EDIFACT Envelopes
        • Validating the EDI Document Envelope
    •  Sending EDI Documents to Integration Server via HTTP
      • Identifying the Service to Invoke
      •  Logic to Include in the HTTP Client
        • Example of Input Parameters for the pub.client:http Service
    •  Sending EDI Documents to Integration Server via FTP
      • Identifying the Service to Invoke
      •  Logic to Include in the FTP Client
        • Example of Input Parameters for the pub.client:ftp Service
    •  Sending EDI Documents to Integration Server via File Polling
      • Setting Up File Polling
      • Identifying the Service to Invoke
  •  Creating Clients that Send EDI Documents to Trading Networks
    • Overview
    •  Content Type to Use
      • Content Type for EDI Documents that Do Not Contain Mainframe Data
      • Content Types for EDI Documents that Contain Mainframe Data
    • Service the Client Invokes
    •  Sending EDI Documents to Trading Networks via HTTP/S
      • Example of Input Parameters for the pub.client:http Service
    •  Sending EDI Documents to Trading Networks via FTP
      • Example of Input Parameters for the pub.client:ftp Service
    • Sending EDI Documents to Trading Networks via File Polling
    • Sending EDI Documents to Trading Networks via My webMethods
    • Using a Service to Send Multiple EDI Documents to Trading Networks
  •  Handling Large Documents When Using Trading Networks
    • Overview
    •  Configuring Module for EDI for Large Document Handling
      • Determining When an EDI Document Is Large
    • Converting Large Documents to IData Objects Iteratively
    • Troubleshooting Memory Constraint Problems
  •  Generating Acknowledgments
    • Overview
    • Generating Functional Acknowledgments
    •  Before You Can Generate a Functional Acknowledgment
      • Configuring the Maximum Number of Transaction Errors
    •  Determining How Module for EDI Reports FA Status
      • Determining If the Child Transaction is Allowed in Its Envelope
      • Determining If a Transaction Is an FA or If a Group Contains an FA
      • syntaxErrorStatus Parameter
      • logicalErrorStatus Parameter
      • childTransactionRejectedStatus Parameter
      •  How Module for EDI Determines Which FA Status to Use
        • Transaction FA Status
        • Group FA Status
        • UN/EDIFACT Interchange FA Status
    •  When to Invoke the generateFA Service
      •  Using a Service that Processes Documents at One Time
        • Invoking generateFA Before Invoking envelopeProcess
        • Invoking generateFA Immediately after Invoking envelopeProcess
      • Using a Service that Processes Documents Iteratively
    • Output from the generateFA Service
    •  Tracking Late Functional Acknowledgments
      • Before Tracking Late FAs
      • Tracking Late FAs
      • Example
    • Generating Interchange Acknowledgments
  •  Before Creating the Service to Process EDI Documents
    • Overview
    • Inputs to Your Service
    •  Logic to Include in the Service to Process EDI Documents
      • Determining Which Process Method to Use
      •  Processing the Entire Document at One Time
        • Performing Envelope Validation and Compliance Checks
      •  Processing the Document Iteratively, Segment by Segment
        • Customizing the EDI Flat File Schema
        • Logic for the Service to Process the Document Iteratively
    • Samples
  •  Preparing to Process Inbound Non-TRADACOMS Documents Using Trading Networks
    • Overview
    • Preparing to Receive EDI Documents
    •  Specifying EDITPA Variables that Affect Inbound Processing
      • Validating the EDIFACT Document Schema
      • Validating VDA Message Structure
    •  Trading Networks Attributes and EDI Documents
      •  System Attributes that Module for EDI Sets
        • DocumentID
        • GroupID
        •  ConversationID
          • Enabling Extraction of ConversationIDs from an EDI Document
          • Disabling Extraction of ConversationIDs from EDI Documents
      •  Custom Attributes that Module for EDI Sets
        • EDI Group Type
        • EDI Outbound FA
        • EDI Processing Mode
        • EDI Status
        • EDI Version
        • Envelope CntrlNum Status and Group CntrlNum Status
        • EDI FA Status
        • TA1 Status and TA1 Code
      •  Managing Custom Attributes for EDI Documents
        • Setting the Attribute Values at Run Time
        • Defining a Processing Rule that Uses Your Custom Attribute as Criteria
    •  Defining Processing Rules to Process Inbound EDI Documents
      • Specifying Processing Rule Criteria
      • Specifying Preprocessing Actions
      • Specifying Processing Actions
    •  Coding Services to Process Transaction and Group Documents
      • Information in the Pipeline that Your Service Can Access
      • Logic to Process a Transaction Document
      • Logic to Process a Group Document when splitOption is Group
  •  Processing Inbound TRADACOMS Documents Using Trading Networks
    • Overview
    • Before Setting Up Processing of Inbound EDI Documents When Using TRADACOMS
    • Specifying EDITPA Variables that Affect Inbound Processing When Using TRADACOMS
    •  Trading Networks Attributes and EDI Documents When Using TRADACOMS
      •  System Attributes that Module for EDI Sets When Using TRADACOMS
        • DocumentID
        • GroupID
      • Custom Attributes that Module for EDI Sets When Using TRADACOMS
      •  Managing Your Own Custom Attributes for EDI Documents When Using TRADACOMS
        • Setting Attribute Values at Run Time When Using TRADACOMS
        • Defining a Processing Rule that Uses Your Custom Attribute as Criteria When Using TRADACOMS
    •  Defining Processing Rules to Process Inbound EDI Documents When Using TRADACOMS
      • Specifying Processing Rule Criteria When Using TRADACOMS
      • Specifying Preprocessing Actions When Using TRADACOMS
      • Specifying Processing Actions When Using TRADACOMS
    •  Coding Services to Process File and Batch Documents When Using TRADACOMS
      • Information in the Pipeline that Your Service Can Access When Using TRADACOMS
      • Logic to Process a File Document
      • Logic to Map a File Document to an Internal-Format Document
  •  Optional Inbound Processing When Using Trading Networks
    • Overview
    •  Validating Inbound Control Numbers
      • Valid Control Numbers
      •  Invalid Control Numbers
        • Duplicate Control Numbers
        • Out-of-Sequence Control Numbers
      • Performing Control Number Validation
      •  Actions Module for EDI Can Take for Invalid Control Numbers
        • Error & Continue
        • Process Normally
        • Reject
    •  Defining Processing Rules to Handle Documents with Invalid Control Numbers
      • Setting the EDI Status Custom Attribute for Control Number Validation
      • Defining the Processing Rule to Handle Documents with Invalid Control Numbers
    •  Reprocessing EDI Documents with Invalid Control Numbers
      • Reprocessing Documents with Duplicate Control Numbers
      •  Reprocessing Documents with Out-of-Sequence Control Numbers
        • Creating a Service to Reprocess Documents with Out-of-Sequence Control Numbers
    •  Automatically Generating Functional Acknowledgments
      • Turning Automatic FA Generation On and Off
      • Determining How Module for EDI Reports FA Status
      • Defining FA Statuses as Acceptable and Unacceptable
      •  Defining Actions Module for EDI Takes Based on FA Status
        • Processing Documents with Acceptable FA Statuses
        • Processing Documents with Unacceptable FA Statuses
      • Defining a Processing Rule to Deliver FAs
      • Defining Processing Rules for Documents with Unacceptable FA Statuses
    • Automatically Generating Interchange Acknowledgments
    • Performing Optional Processing of Inbound EDI Documents
  •  Forming EDI Documents to Send Outbound When Using Trading Networks
    • Overview
    • Preparing Trading Networks to Process Internal-Format Documents
    •  Creating the Service to Form the EDI Document
      • Before Creating the Service to Form an EDI Document
      •  Creating the Service
        • Obtaining Control Numbers for Outbound Processing (ANSI X12 and UN/EDIFACT)
        • Adding TRADACOMS Envelopes and Obtaining Control Numbers
    •  Delivering the Outbound EDI Document
      • Delivering the EDI Document Directly from the Service that Forms It
      •  Submitting the EDI Document to Trading Networks
        • Specifying Variables that Affect Outbound Processing
        • Specifying Variables that Affect Outbound Processing When Using TRADACOMS
        • Preparing Trading Networks to Deliver the EDI Document
        •  Adding Logic to the Service that Forms the EDI Document to Submit to Trading Networks
          • Preparing the Pipeline to Invoke the wm.tn.doc.xml:routeXML Service
      •  Routing the Outbound EDI Document to Trading Networks
        • Adding Logic to the Service that Forms the EDI Document that Routes through Trading Networks
        • Creating a BizDocEnvelope for the Outbound EDI Document
  •  Batching EDI Documents
    • Overview
    • Indicating How Many Batch EDI Documents to Create
    • How Documents Are Combined to Create the Batch EDI Document
    •  Extracting Transactions and Sorting the Batched Documents
      •  Sorting Transactions in the Queued Documents
        • Collection Areas Representing an Interchange in the Final Batch EDI Document
        • Subcollections Representing a Group in the Final Batch EDI Document
        • Delimiters Associated with Collection Areas
        • Example of Sorting Documents
      •  When EDI Documents Have No Interchange or Transmission Header
        •  Sorting Transactions when Queued Documents Have No Interchange Headers
          • Default Collection Area (Interchange in the Final Batch EDI Document)
          • Subcollections when there Are No Headers (Groups in the Final Batch EDI Document)
          • Delimiters Associated with the Default Collection Area
      • Delimiters Used for the Batch EDI Document
      • Updating the Task Status and Publishing Documents for Failed Tasks
    •  Recombining the Transactions into the Batch EDI Document
      • Creating the Batch EDI Document when Using SINGLEOUTPUT
      • Creating the Batch EDI Document when Using MULTIPLEOUTPUTS
    • Before You Can Batch EDI Documents
    •  Controlling How the batchProcess Service Forms the Batch Document
      •  EDITPA Variables that the batchProcess Service Uses
        • EDITPA Variables Used when Sorting Transactions
        • EDITPA Variables Used when Recombining Transactions
    •  Preparing to Batch EDI Documents
      • Determining the Number of Queues You Need to Define
      • Defining the Scheduled Delivery Queues
      • Defining Processing Rules to Batch EDI Documents
    • Delivering the Batch EDI Document
    • Viewing Batched EDI Documents
  •  Retrieving and Delivering EDI Documents from and to VANs
    • Overview
    • Preparing to Retrieve Documents from a VAN
    •  Preparing to Deliver Documents to VANs
      • Defining the Scheduled Delivery Queue
      • Defining a Processing Rule to Place Documents in the Queue
    • Handling Conventions Required by Specific VANs
    • Customizing Built-In Services to Connect to Another VAN
  •  Reconciling Functional Acknowledgments
    •  Overview
      • FA Reconciliation
    • Turning FA Reconciliation On or Off
    •  Information Module for EDI Records to Reconcile FAs
      •  FA Statuses
        • Controlling FA Status for Documents Submitted Multiple Times
        • Setting FA Status Manually
  •  Viewing Log Information for EDI Documents
    • Overview
    • Viewing the Server Log
    • Viewing the Trading Networks Activity Log
  •  Viewing Information about EDI Documents
    • Overview
    • EDI Documents You Can View
    •  Viewing EDI Documents
      • Trading Networks Processing Status and EDI Documents
    • Viewing Information about EDI Documents in Queues
    • Viewing Related Documents with Relationship Labels
  •  Including Documents in a Business Process
    • Overview
    •  Designing the Process Model
      • Sample Process Models for ANSI X12
      • Sample Process Models for UN/EDIFACT
    •  Assigning Conversation IDs to EDI Documents
      • Instance IDs for Interchange, Group, and Transaction Documents
      • Instance IDs for Functional Acknowledgments
    • Sample Business Process
    • Monitoring Your Business Processes
  •  Non-Standard Processing
    • Overview
    •  Defining Partner Information When Using Non-Standard Processing
      • Defining Trading Networks Profiles When Using Non-Standard Processing
      •  Defining a Partner-Specific EDITPA When Using Non-Standard Processing
        • wm.b2b.editn.TPA:EDITPA IS Document Type When Using Non-Standard Processing
      •  Defining Interchange-Level Sender/Receiver Pair Information
        • Editing and Deleting Interchange-Level Sender/Receiver Pair Information
      •  Defining Group-Level Sender/Receiver Pair Associations
        • Querying for Group-Level Sender/Receiver Pair Associations
    •  Defining Control Number Information for Partners When Using Non-Standard Processing
      • Turning Inbound Control Number Validation On or Off When Using Non-Standard Processing
      • Defining Actions for Invalid Control Numbers
      • Defining the Control Number Settings
    •  Processing Inbound EDI Documents using Trading Networks and Non-Standard Processing
      • Before You Can Process Inbound EDI Documents
      • Variables that Affect Inbound Processing
    •  Forming EDI Documents to Send Outbound When Using Trading Networks and Non-Standard Processing
      • Before Creating the Service to Form an EDI Document
      • Creating the Service When Using Non-Standard Processing
  •  Using Module for EDI Decoupled from Trading Networks
    •  Overview
      • Using Only the WmEDI Package with Integration Server
    • Configuring Module for EDI Decoupled from Trading Networks
    • Preparing Module for EDI Decoupled from Trading Networks
    •  Creating Flat File Schemas for EDI Documents
      • Creating a Flat File Schema from a SEF File
      • Creating a Flat File Schema from an IDOC
    •  Forming EDI Documents and Sending Them Outbound
      • Validating the Input Internal-Format Document When It Is an IData Object
      • Adding UN/EDIFACT Envelopes
      • Checking Your Work
    • Example
•  Building Services with EDI Module
  •  Part I WmEDI Package
    •  WmEDI Core Services
      •  Summary of Elements in this Folder
        • wm.b2b.edi:convertToString
        • wm.b2b.edi:convertToValues
        • wm.b2b.edi:createIDOCtemplate
        • wm.b2b.edi:createTemplateFromSEF
        • wm.b2b.edi:createW3CXMLSchema
        • wm.b2b.edi:envelopeProcess
        • wm.b2b.edi:SEFParse
    •  WmEDI Migration Folder
      •  Summary of Elements in this Folder
        • wm.b2b.edi.migration:migrateTemplate
    •  WmEDI TemplateMgr Folder
      •  Summary of Elements in this Folder
        • wm.b2b.edi.templateMgr:getProperties
        • wm.b2b.edi.templateMgr:getTemplate
    •  WmEDI TRADACOMS Folder
      •  Summary of Elements in this Folder
        • wm.b2b.edi.tradacoms:convertToString
        • wm.b2b.edi.tradacoms:convertToValues
        • wm.b2b.edi.tradacoms.compose:addToTradacomsTransmission
        • wm.b2b.edi.tradacoms.compose:endTradacomsTransmission
        • wm.b2b.edi.tradacoms.compose:startTradacomsBatch
        • wm.b2b.edi.tradacoms.compose:startTradacomsTransmission
    •  WmEDI Util Folder
      •  Summary of Elements in this Folder
        • wm.b2b.edi.util:addGroupEnvelope
        • wm.b2b.edi.util:addGroupEnvelopeEDIFACT
        • wm.b2b.edi.util:addICEnvelope
        • wm.b2b.edi.util:addICEnvelopeEDIFACT
        • wm.b2b.edi.util:concatStringArray
        • wm.b2b.edi.util:controlNumber
        • wm.b2b.edi.util:convertToValues
        • wm.b2b.edi.util:EDIconcat
        • wm.b2b.edi.util.FA:lite997
        • wm.b2b.edi.util:generateFA
        • wm.b2b.edi.util:getEDIDictionaryName
        • wm.b2b.edi.util:getEDIFFSchemaName
        • wm.b2b.edi.util:getEDIstring
        • wm.b2b.edi.util:invoke
        • wm.b2b.edi.util:makeArray
        • wm.b2b.edi.util:nullBlankCheck
        • wm.b2b.edi.util:nullifyIfBlank
        • wm.b2b.edi.util:pad
        • wm.b2b.edi.util:standardCheck
        • Format Services: Inputs and Outputs
        • wm.b2b.edi.util.formatServices:formatAN
        • wm.b2b.edi.util.formatServices:formatDate6
        • wm.b2b.edi.util.formatServices:formatDate8
        • wm.b2b.edi.util.formatServices:formatDecimal
        • wm.b2b.edi.util.formatServices:formatN
        • wm.b2b.edi.util.formatServices:formatN0
        • wm.b2b.edi.util.formatServices:formatN1
        • wm.b2b.edi.util.formatServices:formatN2
        • wm.b2b.edi.util.formatServices:formatN3
        • wm.b2b.edi.util.formatServices:formatN4
        • wm.b2b.edi.util.formatServices:formatN5
        • wm.b2b.edi.util.formatServices:formatN6
        • wm.b2b.edi.util.formatServices:formatN7
        • wm.b2b.edi.util.formatServices:formatN8
        • wm.b2b.edi.util.formatServices:formatN9
        • wm.b2b.edi.util.formatServices:formatTime4_4
        • wm.b2b.edi.util.formatServices:formatTime4_6
        • wm.b2b.edi.util.formatServices:formatTime4_8
        • wm.b2b.edi.util.formatServices:formatTime6_6
  •  Part II WmEDIforTN Package
    •  WmEDIforTN VANConnectivity Folder
      •  Summary of Elements in this Folder
        • VAN.VANConnectivity:FTPConnection
        • VAN.VANConnectivity:getFromVAN
        • VAN.VANConnectivity:getReportFromVAN
        • VAN.VANConnectivity:putToVAN
    •  WmEDIforTN TRADACOMS Folder
      •  Summary of Elements in this Folder
        • wm.b2b.edi.tradacoms.doc:getContentPart
        • wm.b2b.edi.tradacoms.doc:getDocumentPartInfo
        • wm.b2b.edi.tradacoms.doc:getDocumentStream
        • wm.b2b.edi.tradacoms.doc:getFFSchemaNames
        • wm.b2b.edi.tradacoms.doc:isFileEnvelope
        • wm.b2b.edi.tradacoms.ui:modifyTradacomsSchema
    •  WmEDIforTN Core Services
      •  Summary of Elements in this Folder
        • wm.b2b.editn:addAttributeTypeToBizDoc
        • wm.b2b.editn:bizdocToRecord
        • wm.b2b.editn:ediPartnerIDToTNPartnerID
        • wm.b2b.edi:generateX12TA1
        • wm.b2b.editn:getICDetail
        • wm.b2b.editn:getTransactionSetDetail
        • wm.b2b.editn:getTspace
        • wm.b2b.editn:trackEDIdocs
        • wm.b2b.editn:validateEnvelope
        • wm.b2b.editn:validateTransaction
        • wm.b2b.editn:wrapData
    •  WmEDIforTN Batch Folder
      •  Summary of Elements in this Folder
        • wm.b2b.editn.batch:batchProcess
        • wm.b2b.editn.batch:getControlNumber
    •  WmEDIforTN CrossRef Folder
      •  Summary of Elements in this Folder
        • wm.b2b.editn.crossRef:deleteEnvInfo
        • wm.b2b.editn.crossRef:getEnvInfo
    •  WmEDIforTN Db Folder
      •  Summary of Elements in this Folder
        • wm.b2b.editn.db:deleteControlNumber
        • wm.b2b.editn.db:deleteFAInfo
    •  WmEDIforTN Doc Folder
      •  Summary of Elements in this Folder
        • wm.b2b.editn.doc:listTransactionTypes
        • wm.b2b.editn.doc:saveQuery
    •  WmEDIforTN FAReport Folder
      •  Summary of Elements in this Folder
        • wm.b2b.editn.FAReport:generateFAReport
    •  WmEDIforTN Migration Services
      •  Summary of Elements in this Folder
        • wm.b2b.editn.migration:updateBizDocs
    •  WmEDIforTN Rec Folder
      •  Summary of Elements in this Folder
        • wm.b2b.editn.rec:batchFailRecord
    •  WmEDIforTN TPA Folder
      •  Summary of Elements in this Folder
        • wm.b2b.editn.TPA:getEDITPAData
    •  WmEDIforTN Util Folder
      •  Summary of Elements in this Folder
        • wm.b2b.editn.util:getContentPartDataAsInputStream
        • wm.b2b.editn.util.reprocess:listInSequenceDoc
        • wm.b2b.editn.util.reprocess:listUnprocessDoc
        • wm.b2b.editn.util.reprocess:nextInSequenceDoc
        • wm.b2b.editn.util.reprocess:reprocessDocument
        • wm.b2b.editn.util.reprocess:validateControlNumber
        • wm.b2b.edi.util:updateVDAEnvelope
        • wm.b2b.editn.util.VersionSupport:addNewEDIVersion

IBM webMethods Module for EDI

wm.b2b.editn.util.VersionSupport:addNewEDIVersion